Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Disable the SIR system. Refer to SIR Disabling and Enabling .
- Remove the front seat back cover. Refer to Front Seat Back Cover and Cushion Pad Replacement
.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the electrical connector (3) from the side impact module.
- Remove the side impact module fasteners (1).
- Remove the side impact module (2).
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .