LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Seat Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Position Sensor
    GM1463091Courtesy of GENERAL MOTORS CORP.
  1. Install the seat position sensor (2).
  2. Install the seat position sensor fastener (1).
    3. Fig 2: View Of Feeler Gage Between Seat Position Sensor And Seat Rail
    GM1463088Courtesy of GENERAL MOTORS CORP.
  3. Insert a 1 mm (0.039 in) feeler gage between the seat position sensor (1) and seat rail (2).
    4. Fig 3: View Of Seat Position Sensor
    GM1463091Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  4. Tighten the seat position sensor fastener (1).

    Tighten:  Tighten the seat position sensor fastener to 8 N.m (71 lb in).

    5. Fig 4: View Of Feeler Gage Between Seat Position Sensor And Seat Rail
    GM1463088Courtesy of GENERAL MOTORS CORP.
  5. Check that the clearance between the seat position sensor (1) and seat rail (2) is 0.6 mm (0.023 in) to 2 mm (0.079 in).
  6. Install the seat position sensor electrical connector.
    7. Fig 5: Removing/Installing Seat Position Sensor Cover
    GM1463094Courtesy of GENERAL MOTORS CORP.
  7. Install the seat position sensor cover (1).
  8. Install the LH front seat. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals