LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System And Remote Functions >> Repair Instructions >> Transmitter Battery Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Releasing Cover Halves Using Screwdriver
    GM245099Courtesy of GENERAL MOTORS CORP.
  1. Place the remote control door lock receiver transmitter face down on a clean surface.
  2. Insert a small screwdriver into the slot on the bottom of the transmitter.
  3. Carefully turn the screwdriver in the slot until the cover releases.
    4. Fig 2: Transmitter Battery, Halves And Seal
    GM245093Courtesy of GENERAL MOTORS CORP.
  4. Remove the cover while being careful not to damage the seal.
  5. Remove the battery from the transmitter.
scientia non olet · About LEMON Manuals