Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Accelerator Cable Adjusting Locknut | 8 N.m | 71 lb in |
| Accelerator Cable Attaching Fastener | 2 N.m | 18 lb in |
| Accelerator Cable-to-Bulkhead Fastener | 15 N.m | 11 lb ft |
| Accelerator Pedal Bracket Fastener | 5 N.m | 44 lb in |
| Accelerator Pedal Cable-to-Bulkhead Fastener | 15 N.m | 11 lb ft |
| Camshaft Position (CMP) Actuator Solenoid Valve Fastener | 9 N.m | 80 lb in |
| Camshaft Position (CMP) Actuator Solenoid Valve Oil Filter Plug | 30 N.m | 22 lb ft |
| Camshaft Position (CMP) Sensor Fastener | 9 N.m | 80 lb in |
| Crankshaft Position (CKP) Sensor Fastener | 9 N.m | 80 lb in |
| Engine Coolant Temperature (ECT) Sensor | 20 N.m | 15 lb ft |
| Engine Cover Plate Fastener | 7 N.m | 62 lb in |
| Evaporative Emission (EVAP) Canister Support Bracket-to-Chassis Fastener | 19 N.m | 14 lb ft |
| EVAP Canister Bracket Fastener | 8 N.m | 71 lb in |
| EVAP Canister Vent Solenoid Valve Fastener | 8.8 N.m | 77 lb in |
| EVAP Pressure Switching Solenoid Valve Fastener | 8.8 N.m | 77 lb in |
| EVAP Vacuum Leak Pump Assembly Fastener | 8 N.m | 71 lb in |
| EVAP/Fuel Pipe Protector Fasteners | 1.2-2 N.m | 11-18 lb in |
| Fuel Filler Pipe Bracket Fastener | 30 N.m | 22 lb ft |
| Fuel Filler Pipe-to-Fuel Filler Pipe Bracket Fasteners | 6 N.m | 53 lb in |
| Fuel Filler Vent Valve (FLVV) Protective Cover Fastener | 3.5 N.m | 31 lb in |
| Fuel Injector Wire Harness Cover Plate Fastener | 16 N.m | 12 lb ft |
| Fuel Pipe Front Bulkhead Support Fastener | 6 N.m | 53 lb in |
| Fuel Rail Fastener | 19 N.m | 14 lb ft |
| Fuel Rail Inlet Pipe Hold Fastener | 9 N.m | 80 lb in |
| Fuel Sender Assembly Hold Down Plate Fastener | 6 N.m | 53 lb in |
| Fuel Sender Assembly Protective Cover Fastener | 6 N.m | 53 lb in |
| Fuel Tank Access Panel Fasteners, FWD only | 6 N.m | 53 lb in |
| Fuel Tank - Rear Exhaust Heat Shield Fastener | 5.4 N.m | 48 lb in |
| Fuel Tank Retaining Strap Fastener | 39 N.m | 29 lb ft |
| Heated Oxygen Sensor (HO2S) 1 | 44 N.m | 32 lb ft |
| Heated Oxygen Sensor (HO2S) 2 | 44 N.m | 32 lb ft |
| Idle Air Control (IAC) Fasteners | 3.7 N.m | 33 lb in |
| Ignition Coil Fastener | 9 N.m | 80 lb in |
| Knock Sensor (KS) | 20 N.m | 15 lb ft |
| Mass Air Flow (MAF) Sensor Fasteners | 2.0 N.m | 18 lb in |
| Negative Battery Cable Terminal Retainer Fastener | 15 N.m | 11 lb ft |
| Parking Brake Cable Fasteners | 5.4 N.m | 48 lb in |
| Powertrain Control Module (PCM) Mounting Fastener | 15 N.m | 11 lb ft |
| Power Steering Pressure (PSP) Switch | 21 N.m | 15.5 lb ft |
| Spark Plug | 25 N.m | 18 lb ft |
| Throttle Body/Accelerator Cable Bracket Fastener | 13 N.m | 9.5 lb ft |
| Throttle Body Fasteners, with TP sensor and IAC Valve (AWD only) | 30 N.m | 22 lb ft |
| Throttle Body Fasteners, with Throttle Actuator Control (TAC) System (FWD only) | 9 N.m | 80 lb in |
| Throttle Position (TP) Sensor Fasteners | 2.0 N.m | 18 lb in |