Removal Procedure
- Disconnect the battery negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle
.
Courtesy of GENERAL MOTORS CORP.
- Remove the starter motor solenoid positive terminal nut and electrical wires.
- Remove the starter motor solenoid S terminal nut and electrical wire.
Courtesy of GENERAL MOTORS CORP.
- Remove the torque converter cover bolt (2).
- Remove the torque converter cover (1).
Courtesy of GENERAL MOTORS CORP.
- Remove the starter motor bolts (2, 3).
- Remove the starter motor (1).