Rear Window Switch
- Ignition OFF, disconnect the harness connector at the appropriate rear Window switch.
- Test for infinite resistance between the signal terminals F and G and the B+ circuit terminal A with the switch in the INACTIVE position.
- If less than infinite resistance, replace the appropriate rear window switch.
- Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal A with the switch in the UP position.
- If greater than the specified range, replace the appropriate rear window switch.
- Test for less than 2 ohms of resistance between the signal terminal G and the B+ circuit terminal A with the switch in the DOWN position.
- If greater than the specified range, replace the appropriate rear window switch.