Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of XM Radio Receiver, Bracket & Bracket Nuts

Courtesy of GENERAL MOTORS CORP.

Install the XM digital radio receiver to the receiver bracket.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the radio receiver nuts.
Tighten: Tighten the nuts to 4 N.m (35 lb in).

Fig 2: Identifying XM Digital Radio Receiver

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector and the antenna connectors to the XM radio receiver.
Install the left rear trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower in Interior Trim.
Perform the setup procedure for the digital radio receiver. Refer to Digital Radio Receiver Setup .