LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Torrent AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.4L - Introduction (2 Of 2) >> Repair Instructions >> Exhaust Gas Recirculation Valve Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of EGR Valve & Pipe
    GM1087633Courtesy of GENERAL MOTORS CORP.
  1. Install the EGR valve (1) with a new gasket to the intake manifold.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the EGR valve bolts (2).

    Tighten:  Tighten the bolts to 30 N.m (22 lb ft).

  3. Connect the EGR valve electrical connector.
  4. Install the EGR pipe (4). Refer to Exhaust Gas Recirculation Pipe Replacement .
scientia non olet · About LEMON Manuals