Removal Procedure

CAUTION: Refer to Cracked Window Caution .

Remove the rear quarter front applique. Refer to Rear Door Frame Applique Replacement .

Fig 1: View Of Quarter Window

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Before cutting out a quarter window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.

Open the liftgate.
Remove the inside garnish molding.

CAUTION: Refer to Defroster Outlet Caution .

Cover the following parts to protect from broken glass:
- Upper dash pad
- Defroster outlets and A/C outlets
- Seats and carpeting

CAUTION: Refer to Glass and Sheet Metal Handling Caution .

IMPORTANT: When cutting out the quarter window use care not to damage the encapsulation around the perimeter of the quarter window. If the encapsulation is damaged, the window must be replaced.

IMPORTANT: Keep the cutting edge of the tool against the quarter window. Do this from inside the vehicle to protect the outer painted surface.

Remove the window from the urethane adhesive.
- Leave a base of urethane approximately 2 mm (0.078 in) on the pinch-weld flange.
- The only suitable lubrication is clear water.
- Use the J 24402-A , J 39032 or equivalent in order to remove the quarter window. See Special Tools .
With the aid of an assistant, remove the window (1) from the vehicle.