LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Torrent AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Liftgate Window Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Liftgate Window
    GM1413128Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Cracked Window Caution .
    IMPORTANT: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  1. Open the liftgate.
  2. Remove the liftgate trim. Refer to Liftgate Trim Panel Replacement .
  3. Disconnect the electrical connectors from the liftgate window defogger bus bar.
    4. CAUTION: Refer to Defroster Outlet Caution .
  4. Cover the following parts to protect from broken glass:
    • Upper dash pad
    • Defroster outlets and A/C outlets
    • Seats and carpeting
    5. CAUTION: Refer to Glass and Sheet Metal Handling Caution .
    IMPORTANT: Keep the cutting edge of the tool against the window.
    Fig 2: Removing Liftgate Window From Urethane Adhesive
    GM1326377Courtesy of GENERAL MOTORS CORP.
  5. Remove the liftgate window from the urethane adhesive.
    • Leave a base of urethane approximately 2 mm (0.078 in) on the pinch-weld flange.
    • The only suitable lubrication is clear water.
    • Use J 24402-A  , J 39032  or equivalent in order to remove the window. See Special Tools .
  6. With the aid of an assistant, remove the window from the vehicle.
scientia non olet · About LEMON Manuals