LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Torrent AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Diagnostic Information and Procedures >> Power Windows Inoperative - All >> Component Testing >> Main Power Window Switch

Main Power Window Switch

  1. Ignition OFF, disconnect the harness connector at the Main Power Window switch.
  2. Test for infinite resistance between the signal terminals 2 and 5 and the B+ circuit terminal 2 with the LR Switch in the INACTIVE position.
    • If less than infinite resistance, replace the Main Power Window switch.
  3. Test for less than 2 ohms of resistance between the signal terminal 2 and the B+ circuit terminal 2 with the switch in the UP position.
    • If greater than the specified range, replace the Main Power Window switch.
  4. Test for less than 2 ohms of resistance between the signal terminal 5 and the B+ circuit terminal 2 with the switch in the DOWN position.
    • If greater than the specified range, replace the Main Power Window switch.
  5. Test for infinite resistance between the signal terminals 3 and 3 and the B+ circuit terminal 2 with the RR Switch in the INACTIVE position.
    • If less than infinite resistance, replace the Main Power Window switch.
  6. Test for less than 2 ohms of resistance between the signal terminal 3 and the B+ circuit terminal 2 with the switch in the UP position.
    • If greater than the specified range, replace the Main Power Window switch.
  7. Test for less than 2 ohms of resistance between the signal terminal 3 and the B+ circuit terminal 2 with the switch in the DOWN position
    • If greater than the specified range, replace the Main Power Window switch.
  8. Test for infinite resistance between the signal terminals 5 and 6 and the B+ circuit terminal 2 with the Front Passenger Switch in the INACTIVE position.
    • If less than infinite resistance, replace the Main Power Window switch.
  9. Test for less than 2 ohms of resistance between the signal terminal 5 and the B+ circuit terminal 2 with the switch in the UP position.
    • If greater than the specified range, replace the Main Power Window switch.
  10. Test for less than 2 ohms of resistance between the signal terminal 6 and the B+ circuit terminal 2 with the switch in the DOWN position.
    • If greater than the specified range, replace the Main Power Window switch.
  11. Test for infinite resistance between the signal terminals 5 and 4 and the B+ circuit terminal 2 with the Driver Switch in the INACTIVE position.
    • If less than infinite resistance, replace the Main Power Window switch.
  12. Test for less than 2 ohms of resistance between the signal terminal 5 and the B+ circuit terminal 2 with the switch in the UP position.
    • If greater than the specified range, replace the Main Power Window switch.
  13. Test for less than 2 ohms of resistance between the signal terminal 4 and the B+ circuit terminal 2 with the switch in the DOWN position.
    • If greater than the specified range, replace the Main Power Window switch.
scientia non olet · About LEMON Manuals