Installation Procedure
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Synchronize the sunroof motor/actuator (1). Refer to Sunroof Motor Synchronization .
- Install the sunroof motor/actuator (1) to the sunroof module.
- Install the sunroof motor/actuator bolts (2).
Tighten: Tighten the bolts to 5 N.m (44 lb in).
- Connect the electrical connector to the sunroof motor/actuator.
- Secure the electrical harness to the sunroof module.
- Verify the sunroof operation.
- Install the headliner. Refer to Headlining Trim Panel Replacement .
- Refer to Control Module References .
NOTE:
Refer to Fastener Notice
.