Circuit/System Verification
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool Trunk Release Switch parameter while pressing and releasing the rear compartment lid release switch. The parameter should change between Active and Inactive.
- If the value does not change between Active and Inactive, refer to Rear Compartment Lid Switch Malfunction in Circuit/System Testing .
- Command the trunk release with a scan tool. The rear compartment lid release actuator should release the trunk lid.
- If the trunk latch does not does not release, refer to Rear Compartment Lid Malfunction in Circuit/System Testing .