LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Solstice Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: ECT Sensor Electrical Connector
    GM1591858Courtesy of GENERAL MOTORS CORP.
  1. Partially drain the cooling system. Refer to Draining and Filling Cooling System (GE-47716) or Draining and Filling Cooling System (2.4L LE5 Only) .
  2. Disconnect the engine wiring harness electrical connector (6) from the engine coolant temperature (ECT) sensor.
    3. Fig 2: ECT Sensor
    GM1713085Courtesy of GENERAL MOTORS CORP.
  3. Remove the ECT.
scientia non olet · About LEMON Manuals