Circuit/System Testing
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
- Disconnect the cruise control switch.
- Ignition ON, cruise control switch ON, verify that the scan tool Cruise Set/Coast Switch parameter displays Off or Inactive.
- If the scan tool parameter reads On, Active or Invalid, test the cruise control switch signal circuit for a short to voltage. If the circuit tests normal, replace the ECM/PCM.
- If all circuits test normal, replace the cruise control switch assembly.