LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Object Detection System) >> Repair Instructions >> Information Center Telltale Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Information Center Telltale Assembly Bezel
    GM491154Courtesy of GENERAL MOTORS CORP.
  1. Position your fingers between the headliner and the information center telltale assembly bezel and gently pull down to release the display bezel retainers.
    2. Fig 2: View Of Screwdriver & Locking Tab Of Telltale Assembly
    GM491156Courtesy of GENERAL MOTORS CORP.
  2. Use a small flat-bladed tool to release the locking tab at the rear of the telltale assembly.
    3. Fig 3: View Of Information Center Telltale Assembly
    GM491157Courtesy of GENERAL MOTORS CORP.
  3. Tilt the information center telltale assembly down and pull down to remove.
  4. Disconnect the electrical connector from the information center telltale assembly.
scientia non olet · About LEMON Manuals