Installation Procedure
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the front speaker electrical connector to the front speaker.
- Lower the speaker into the opening in the I/P.
- Install the center speaker screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Align the speaker grille to the I/P.
- Press the speaker grille into the I/P.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.