Removal Procedure
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the end cap on the side of the instrument panel (I/P).
- Pull out to remove the tweeter speaker wire clip from the I/P.
- Disconnect the speaker wire from the I/P electrical harness.
- Remove the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
- Pull the speaker wire up through the I/P.
- Remove the speaker from the vehicle.