LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Front Side Door Window Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Window Guide Channel Bolts (Front Door)
    GM797960Courtesy of GENERAL MOTORS CORP.
  1. Position the window in between the inner and the outer panels.
    1. Point the lower front corner of the front door window down.
    2. Pass the front door window through the belt opening.
    3. Align the edges of the window with the door window weatherstrip.
    4. Ensure that both sealing lips on the front door outer belt sealing strip are not rolled over and pointing downward.

      If this condition is present, the window will not raise properly.

  2. Raise the window regulator to the middle position.
    3. NOTE: Refer to Fastener Notice .
  3. Install the forward window guide channel bolts (2) that attach the window to the regulator.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  4. Install the rearward window guide channel bolts (2) that attach the window to the regulator.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  5. Remove the masking tape.
  6. Inspect the window for proper operation.
  7. Install the front door inner belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner .
  8. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  9. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals