LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Bracket Replacement - Vehicle Location Antenna Module >> Installation Procedure

Installation Procedure

    Fig 1: View Of Antenna Module Bracket
    GM1202535Courtesy of GENERAL MOTORS CORP.
  1. Align the communication interface module to the vehicle location antenna module bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the communication interface module screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 2: View Of Vehicle Location Antenna Module Bracket Bolts
    GM1204600Courtesy of GENERAL MOTORS CORP.
  3. Align the vehicle location antenna module bracket to the locator on the I/P carrier (cross car beam).
  4. Start the bolts by hand to avoid cross threading. Install the vehicle location antenna module bracket bolts (3, 4, 5).

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  5. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement .
scientia non olet · About LEMON Manuals