LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls & Fuel - 3.8L - Introduction (2 Of 2) >> Repair Instructions >> Powertrain Control Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of PCM
    GM1576575Courtesy of GENERAL MOTORS CORP.
  1. Using a scan tool, retrieve the percentage of remaining engine oil. Record the remaining engine oil life.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (RPO LS4) or Battery Negative Cable Disconnection and Connection (RPOs L26/L32) .
  3. Remove the left front inner fender brace. Refer to Front Fender Upper Diagonal Brace Replacement .
  4. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement .
  5. Disconnect the PCM electrical connectors
    6. Fig 2: Removing/Installing PCM
    GM1576577Courtesy of GENERAL MOTORS CORP.
  6. Remove the PCM from the air cleaner lower housing.
scientia non olet · About LEMON Manuals