Tape/CD Player Error Messages

The radio displays an error when any of the following occurs.

• The radio will display error codes for the integral CD player.
• The radio will display the following integral CD player error codes. If one of these problems is detected, the unit will switch to the radio mode and eject the CD. The display will show TOD, if the unit is off, or display the radio frequency for 5 seconds, then the default, if the unit is on.
  • E20 or CHECK CD-Optics focus error, maybe due to moisture
  • E21 or CHECK CD-Optics loss of tracking control, maybe due to blemishes on disc
  • E22 or PLAYER ERR-Load/Unload motor problem
  • E23 or PLAYER ERR-Communication problem