LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> G6 GTP, 4D Sedan >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> Theft Deterrent Module Replacement >> Installation Procedure

Installation Procedure

Fig 1: View Of Theft Deterrent Control Module
GM1207719Courtesy of GENERAL MOTORS CORP.
  1. Install the theft deterrent control module
  2. Tighten the theft deterrent control module screws

    Tighten:  Screws to 5 N.m (44 lb in)

  3. Install the ignition switch. Refer to Ignition And Start Switch Replacement
  4. Program the theft deterrent control module after replacement. Refer to Control Module References
scientia non olet · About LEMON Manuals