LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> G6 Base, 3.5 N >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Multifunction Turn Signal Switch Housing Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Multifunction Switch Housing From Steering Column
    GM1364616Courtesy of GENERAL MOTORS CORP.
  1. Install the multifunction switch housing (2) to the steering column (1).
  2. Connect the electrical connectors to the multifunction switches.
  3. Install the inflatable restraint steering wheel module coil (3). Refer to Inflatable Restraint Steering Wheel Module Coil Replacement .
scientia non olet · About LEMON Manuals