LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> G6 Base, 3.5 N >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of MAP Sensor
    GM1239001Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor and MAP sensor seal into the upper intake manifold.
    2. NOTE: Refer to Fastener Notice .
  2. Install the MAP sensor attaching screw.

    Tighten:  Tighten the attaching screw to 6.5 N.m (57 lb in).

  3. Connect the MAP sensor electrical connector.
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals