LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> G6 Base, 2.4 B >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

    IMPORTANT: Verify that the release lever at the top of the bracket is in the full up position.
    Fig 1: View Of Shoulder Belt Guide Adjuster Bracket
    GM157286Courtesy of GENERAL MOTORS CORP.
  1. Position shoulder belt guide adjuster bracket to the center pillar.
    2. NOTE: Refer to Fastener Notice .
  2. Install the shoulder belt guide belt adjuster bracket bolts.

    Tighten:  Tighten the shoulder belt guide adjuster bracket bolts to 35 N.m (25 lb ft).

  3. Install the upper center pillar trim panel. Refer to Center Pillar Upper Garnish Molding Replacement .
  4. Install the guide loop to the guide adjuster bracket.
  5. Install the guide loop nut.

    Tighten:  Tighten the guide loop nut to 35 N.m (25 lb ft).

  6. Close the guide loop cover.
scientia non olet · About LEMON Manuals