LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> G6 Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Spark Plug Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Ignition Coils
    GM1578474Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
    NOTE: Do not coat spark plug threads with anti-seize compound. If anti-seize compound is used and spark plugs are over-torqued, damage to the cylinder head threads may result.
  1. Install the spark plugs.

    Tighten:  Tighten the plugs to 20 N.m (15 lb ft).

    Specification:  The spark plug gap is 1.06 mm (0.042 in).

  2. Install the ignition coil(s). Refer to Ignition Coil Replacement .
scientia non olet · About LEMON Manuals