LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> G5 Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 2.2L (L61) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Oil Pressure Sensor and/or Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Engine Oil Pressure Sensor
    GM630350Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the engine oil pressure sensor.

    Tighten:  Tighten the oil pressure switch to 22 N.m (16 lb ft).

  2. Connect the engine oil pressure sensor electrical connector.
  3. Lower the vehicle.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals