LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Battery, (-) Cable, (+) Cable, Bracket And Bolt
    GM830275Courtesy of GENERAL MOTORS CORP.
    CAUTION: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.
  1. Disconnect the negative (-) battery cable (3) from the negative (-) battery terminal.
  2. Disconnect the positive (+) battery cable (1) from the positive (+) battery terminal.
  3. Remove the bolt (4) and the battery hold down bracket (2).
  4. Remove the battery (5) from the vehicle.
scientia non olet · About LEMON Manuals