Installation Procedure
- Install the battery tray to the inner fender.
- Install the battery tray bolts.
Tighten: Tighten the bolts to 25 N.m (18 lb ft).
- Install the battery air outlet duct to the battery tray.
- Install the battery air outlet duct fastener.
- Connect the battery cable retainers (1) to the battery tray.
- Install the battery box. Refer to Battery Box Replacement .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.
IMPORTANT:
Ensure that the outlet duct is properly aligned with the battery tray and that it is securely fastened to the rail.