Installation Procedure
- Install the battery to the battery box.
Tighten: Tighten the battery hold down bolt to 15 N.m (11 lb ft).
- Connect the positive battery cable (2) to the battery.
Tighten: Tighten the positive battery terminal bolt to 17 N.m (13 lb ft).
- Connect the negative battery cable (1) to the battery. Refer to Battery Negative Cable Disconnect/Connect Procedure .
CAUTION:
Do not tip the battery over a 45 degree angle or acid could spill causing serious personal injury.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.