Removal Procedure
IMPORTANT:
- Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
- Always route the replacement cable the same way as the original cable.
- Remove the battery. Refer to Battery Replacement .
- Remove the underhood fuse block (UHFB) cover.
- Remove the positive battery cable nut from the UHFB.
- Remove the positive battery cable (2) from the UHFB.
- Remove the battery box. Refer to Battery Box Replacement .
- Disconnect the battery cable retainers (1) from the battery tray.
- Remove the positive battery terminal nut (5) from the starter solenoid.
- Disconnect the positive battery cable (1) from the starter solenoid.
- Remove the positive battery cable from the wire loom.