Installation Procedure

Fig 1: View Of Battery Ground (Negative) Cable And Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.

Install the battery negative cable to the battery.
Tighten: Tighten the battery negative cable terminal bolt to 17 N.m (13 lb ft).

Fig 2: View Of Battery Box Cover

Courtesy of GENERAL MOTORS CORP.

Install battery box cover (1).
Tighten: Tighten the battery box cover screws to 2 N.m (18 lb in).

Fig 3: View Of PCM, Bracket & Wire Harness

Courtesy of GENERAL MOTORS CORP.

Install the PCM and bracket to the battery box cover.
Connect the PCM wire harness (2) to the battery box cover.
Program all of the customer's radio station presets and set the radio clock to the current time.