LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Solstice Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Repair Instructions >> Backup Lamp Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Backup Lamp Switch
    GM880943Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Component Fastener Tightening Notice in Cautions and Notices.
  1. Install the backup lamp switch with a NEW aluminum washer into the transmission case.

    Tighten:  Tighten the backup lamp switch to 44 N.m (32 lb ft).

    2. Fig 2: View Of Backup Lamp Switch Electrical Connector & Oxygen Sensor
    GM1302110Courtesy of GENERAL MOTORS CORP.
  2. Secure the pigtail to the transmission with the tie strap.
  3. Connect the backup lamp switch electrical connector (1) at the pigtail.
  4. Install the front floor closeout panel. Refer to Frame And Underbody .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals