Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Disconnect the negative battery cable (1). Refer to Battery Negative Cable Disconnect/Connect Procedure .
- Remove the negative battery cable ground nut (4) at the side rail stud.
- Remove the negative battery cable terminal (3) from the stud.
Courtesy of GENERAL MOTORS CORP.
- Remove the negative battery cable ground bolt.
- Remove the negative battery cable from the engine.
Courtesy of GENERAL MOTORS CORP.
- Remove the negative battery cable ground nut (1) at the bussed electrical center (BEC) stud.
- Remove the negative battery cable terminal from the BEC stud.
- Remove the negative battery cable clips (4) from the wheelhouse liner.
- Remove the battery cable clip bolt (3).
- Remove the negative battery cable out through the engine wiring harness junction block bracket.