LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> GTO Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.0L - Troubleshooting & Diagnosis >> Service Bay Test >> Test Procedure

Test Procedure

  1. Install a scan tool.
  2. With the scan tool, select the Service Bay Test.
  3. Follow the instructions on the scan tool.
  4. Verify that the EVAP I/M System Status is set to YES.
  5. Check DTCs with the scan tool.
  6. Continue with the published service manual diagnostic DTC procedure.
scientia non olet · About LEMON Manuals