LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> G6 GTP, 2D Convertible >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Latch Stop Installation >> Preliminary Procedure

Preliminary Procedure

  1. Locate the hole in the seat belt webbing where the original seat belt stop button was located.
  2. If the original hole in the seat belt webbing is not visible, perform the following:
    • If either the right or left stop button is missing use the opposing seat belt as a reference
    • With the opposing seat belt fully stowed, measure the distance between the seat belt lower anchor and the stop button.
    • Using the measurement obtained above, measure and mark the location of the missing stop button on the center of the seat belt webbing
  3. Ensure the seat belt latch plate is located above the mark or original hole.
scientia non olet · About LEMON Manuals