LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> G6 GT, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System - 3.9L - DTC P0010 To DTC P0300) >> DTC P0010 or P0011 >> Component Testing >> Dynamic Test

Dynamic Test

WARNING: This page is about a different variant/trim than selected.
  1. Install fused jumper wire between the control and 12 volts. Install a jumper wire between the low reference and momentarily connect to ground.
  2. Point the CMP actuator solenoid towards a shop towel. Observe the operation of the solenoid immediately extends.
    • If the function does not perform as specified, replace the CMP actuator solenoid.
scientia non olet · About LEMON Manuals