LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> G6 GT, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing 4 Screws Securing Ignition Coil And Module Assembly To Bracket
    GM1238999Courtesy of GENERAL MOTORS CORP.
  1. Note the position of the spark plug wires for the installation and disconnect the spark plug wires from the ignition coil and module assembly.
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  3. Remove the 4 screws securing the ignition coil and module assembly to the bracket.
  4. Remove the ignition coil and module assembly.
scientia non olet · About LEMON Manuals