LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Keyless Entry System) >> Repair Instructions >> Remote Control Door Lock Receiver Replacement (Sedan) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Receiver Into Vehicle
    GM1250536Courtesy of GENERAL MOTORS CORP.
  1. Install the receiver to the vehicle.
  2. Connect the electrical connectors to the receiver.
  3. Install the rear window shelf panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
  4. The transmitter will need to be programmed after replacement. Refer to Transmitter Programming .
scientia non olet · About LEMON Manuals