LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> G6 Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Throttle Body
    GM1578462Courtesy of GENERAL MOTORS CORP.
  1. Inspect the throttle body gasket and replace if necessary.
  2. Position the throttle body to the intake manifold.
    NOTE: Refer to Fastener Notice .
  3. Install the throttle body bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  4. Fig 2: Locating Electronic Throttle Control (ETC) Electrical Connector
    GM1578460Courtesy of GENERAL MOTORS CORP.
  5. Connect the ETC electrical connector.
  6. Install the air cleaner outlet. Refer to Air Cleaner Outlet Resonator Replacement .