LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> G6 Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Knock Sensor (KS) Replacement >> Installation Procedure

Installation Procedure

IMPORTANT: Rotate the pigtail 90 degrees from vertical before securing the fastener.
    Fig 1: Identifying Knock Sensor
    GM1578476Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the KS.
  2. Install the KS bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

    3. Fig 2: View Of Engine Knock Sensor (KS) Electrical Connector
    GM1571236Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the KS electrical connector (1).
  4. Install the KS electrical connector clip to the oil level indicator tube bracket.
scientia non olet · About LEMON Manuals