LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Vibe GT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L (LNK) - Introduction >> Repair Instructions >> Rocker Arm Oil Control Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Rocker Arm Oil Control Solenoid Valve And O-Ring
    GM828864Courtesy of GENERAL MOTORS CORP.
  1. Install a new O-ring (2) and the rocker arm oil control solenoid valve (1) into the cylinder head.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Secure the rocker arm oil control solenoid valve with the one fastener.

    Tighten:  Tighten the fastener to 9 N.m (80 lb in).

  3. Connect the electrical connector to the solenoid valve.
    4. Fig 2: View Of PCV Hose, Breather Hose And EVAP Hose
    GM850214Courtesy of GENERAL MOTORS CORP.
  4. Connect the PCV hose (1) and the PCV breather hose (2) to the engine.
  5. Connect the EVAP hoses.
    6. Fig 3: View Of Engine Upper Cover
    GM828878Courtesy of GENERAL MOTORS CORP.
  6. Install the engine cover (1) to the engine.
  7. Secure the engine cover (1) with the four fasteners.

    Tighten:  Tighten the fasteners to 7 N.m (62 lb in).

scientia non olet · About LEMON Manuals