LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Vibe Base, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Yaw Rate Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the LH front seat. Refer to Seat Replacement - Front Bucket in Seats.
    2. Fig 1: Deceleration Sensor Bracket And Bolt
    GM839796Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolt (1) and the yaw rate sensor bracket (2).
  3. Disconnect the yaw rate sensor electrical connector.
    4. Fig 2: Deceleration Sensor And Bolts
    GM839809Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 bolts (1) that retain the yaw rate sensor (2).
  5. Remove the yaw rate sensor (2) from the vehicle.
scientia non olet · About LEMON Manuals