LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Vibe Base, FWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular Communication Systems >> Repair Instructions >> Bracket Assembly Replacement - OnStar® Module >> Removal Procedure

Removal Procedure

  1. Remove the communication interface module. Refer to Communication Interface Module Replacement .
  2. Remove the communication vehicle interface unit. Refer to OnStar® Vehicle Interface Unit (VIU) Replacement .
    3. Fig 1: Unclipping Antenna And Module Harness From Module Bracket
    GM1530168Courtesy of GENERAL MOTORS CORP.
  3. Unclip the antenna and module harness (1), from the module bracket.
  4. Disconnect the inverter electrical connector (2).
    5. Fig 2: Removing 3 Module Bracket Mounting Bolts
    GM1530173Courtesy of GENERAL MOTORS CORP.
  5. Remove 3 module bracket mounting bolts.
  6. Remove the module bracket.
scientia non olet · About LEMON Manuals