LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Vibe Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L (LV6) - Introduction >> Repair Instructions >> Fuel Pressure Regulator Replacement (AWD) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Pressure Regulator
    GM828367Courtesy of GENERAL MOTORS CORP.
  1. Apply gasoline to a new fuel pressure regulator O-ring (1).
  2. Install the new O-ring (1) onto the fuel pressure regulator (2).
    3. Fig 2: Fuel Pressure Regulator And Fuel Filter Assembly
    GM1456223Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel pressure regulator (1) into the fuel filter assembly (2).
    4. Fig 3: Fuel Pressure Regulator, Lower Cap And Lower Cushion (AWD)
    GM866112Courtesy of GENERAL MOTORS CORP.
  4. Install the fuel pressure regulator (1) into the fuel sender assembly.
  5. Position the lower cushion (3) on bottom of fuel pump, and install the lower cap (2) to the sender assembly until the cap locks into place.
  6. Install the fuel sender assembly to the fuel tank. Refer to Fuel Sender Assembly Replacement (FWD)  or Fuel Sender Assembly Replacement (AWD) 
scientia non olet · About LEMON Manuals