LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Sunfire Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Catalytic Converter Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Exploded View Of Intermediate Pipe Bolts
    GM25258Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the three-way catalytic converter seals.
  2. Install the intermediate pipe bolts.

    Tighten:  Tighten the intermediate pipe bolts to 30 N.m (22 lb ft).

    3. Fig 2: Locating Exhaust Manifold To Flex Decoupler Nuts
    GM783174Courtesy of GENERAL MOTORS CORP.
  3. Install the three-way catalytic converter to the exhaust manifold.

    Tighten:  Tighten the exhaust manifold pipe nuts (3) to 30 N.m (22 lb ft).

    4. Fig 3: View Of HO2S 2
    GM10975Courtesy of GENERAL MOTORS CORP.
  4. Install the post catalytic converter heated oxygen sensor.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals