LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Sunfire Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Starter
    GM758470Courtesy of GENERAL MOTORS CORP.
  1. Install the starter.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the starter bolts.

    Tighten:  Tighten the starter bolts to 40 N.m (30 lb ft).

    3. Fig 2: Identifying Starter Electrical Connectors
    GM758469Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connectors (4) to the starter.

    Tighten:  Tighten the battery terminal nut to 17 N.m (13 lb ft).

  4. Connect the electrical connectors (3) to the starter.

    Tighten:  Tighten the S terminal nut to 3 N.m (27 lb in).

  5. Lower the vehicle.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals