LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wipers/Washer Switch Replacement >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the windshield wiper switch (2).
  2. Install the windshield wiper switch (2) to the column (6).
    Fig 1: Identifying Windshield Wiper Switch Retaining Screws
    GM490097Courtesy of GENERAL MOTORS CORP.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the retaining screw to the windshield wiper switch (2).

    Tighten:  Tighten the screw to 4 N.m (36 lb in).

  4. Install the multifunction switch. Refer to Multifunction, Turn Signal Switch Replacement in Steering Wheel and Column.
  5. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
  6. Connect the negative battery cable.
  7. Ensure that the windshield wiper switch (2) functions properly.
scientia non olet · About LEMON Manuals