LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Sunfire Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Strut, Strut Component and/or Spring Replacement >> Assembly Procedure

Assembly Procedure

    Fig 1: View Of Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  1. Install the coil spring and upper strut mount to the J 45400  . See Special Tools .
  2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
  3. Install the strut to the coil spring and upper strut mount.
  4. Loosely install the strut retaining nut.
    5. Fig 2: Removing/Installing Strut Retaining Nut
    GM1079158Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Use a 45 TORX® socket in order to hold the strut shaft. Use a strut rod socket or equivalent to Install the upper strut mount nut.

    Tighten:  Tighten the strut mount nut to 75 N.m (55 lb ft).

  6. Remove the strut from the J 45400  . See Special Tools .
  7. Install the strut to the vehicle. Refer to Strut Assembly Replacement .
scientia non olet · About LEMON Manuals